frequency control products type dfv s11-ll revision 01 checked ne date 22.11.2007 page surface mount lvds vcxo dfv s11-llpi features 19.44 to 200 mhz fundamental mode design low jitter applications datacomms function dfv s11 v control 1 enable/disable 2 gnd 3 output 1 4 output 2 5 vcc 6 type dfv s11-llpi frequency range 19.44 to 200 mhz electrical specifications supply voltage 3.3 v 5 % supply current (no load) 80 ma output load 100 between outputs duty cycle @ 1.25 v 45/55?55/45 % rise/fall times ( 20 to 80% ) 0.6 ns high/low levels 1.6 v/ 0.9 v differential output 454 mv differential output error 50 mv offset voltage 1.375 v offset voltage error 50 mv output leakage current 10 a jitter rms (12 khz to 20 mhz) 1 ps rms ( f = 155.52 mhz ) enable / disable on pin 2 high or open = enable, low = disable complementary output on pi n 5 180 phase shifted start up 10 ms @ 3.15 v frequency stability tolerances [ ppm ] type temperature model range code overall stability pulli ng range function control voltage all models 0 to 70 50xb25 25 50 positive 1.65 v 1.35 v 100xb25 25 100xb50 50 100 -40 to 85c 100xe50 50 remarks input impedance 10 k includes 25c calibration, temper ature, ageing, vcc and load changes ordering code type + option code + frequency + model code example dfv s11-llpi 155.52 mhz 100xb25 l 7.0 mm h 1.7 mm 6 4 3 1 5.08 h0.2 2.4 1.4 2.0 5.00.2 2.4 l0.2 5.08 1.4 2 5
|